We are an DJI authorized new drone sales dealer – Contact us today to purchase, ask for more details, or for pricing questions about the Phantom 4 RTK and others listed as “READ MORE”.
This Phantom 4 RTK with D-RTK 2 Mobile Station, Shield Basic, and Accessories Kit from B&H includes a DJI Phantom 4 RTK drone, D-RTK 2 GNSS Mobile Station, a mobile station tripod, DJI Terra Pro software, and the Enterprise Shield Basic Protection Plan. This Phantom 4 RTK drone is capable of providing your business with centimeter-level mapping accuracy. The kit also provides the peace of mind in knowing your investment is protected. The Shield Basic plan gives your new Phantom 4 RTK one year of replacement coverage. In the case of accidental damage, you can replace the drone twice for a nominal fee.
In addition to the Phantom 4 RTK drone, this kit includes an RTK mobile station. In some locations, the Phantom 4 RTK drone could have trouble maintaining a signal for accurate real-time mapping. The mobile station in this kit prepares you for these situations by providing the drone with access to GNSS signals. Simply place it in a location within range of both satellite signals and the Phantom 4 RTK. When set up, use the DJI Terra Pro software to fly detailed missions over your site, creating 2D and 3D models of the location.
DJI Phantom 4 RTK Quadcopter with RTK Controller
The Phantom 4 RTK Quadcopter from DJI is a Phantom 4 quadcopter that is designed to deliver centimeter-level accurate mapping that can be extremely useful for surveying, construction sites, and inspections. Utilizing an RTK receiver on the top of Phantom 4, the Phantom 4 RTK can achieve 1cm+1ppm RTK horizontal and 1.5cm+1ppm RTK vertical positioning accuracy.
In addition to the RTK receiver, the Phantom 4 RTK can achieve such accuracy thanks to DJI’s TimeSync system and the gimbal camera’s calibration process. The camera is the same one that’s on a standard Phantom 4, but with the Phantom 4 RTK, each camera has its radial and tangential lens distortions measured. They are added to the metadata of all captured images, allowing for accurate post-processing that account for the distortions.
The Phantom 4 RTK can perform mapping duties in real-time and When mapping, pilots can utilize the Photogrammetry and Waypoint Flight modes in the GS RTK app. This gives mapping-specific functionality, such as selecting flight paths and directly loading KML area files. Combine it all and you have an enterprise-level mapping solution that can be used right out of the box.
Phantom 4 RTK Controller
GS RTK App
OcuSync for Large Site Mapping
Gimbal Camera with 1″ CMOS Sensor
1″ CMOS Sensor
H.264 and H.265 4K Video Recording
Remote Controller with Lightbridge HD Video Link
Lightbridge HD Video Link
Intelligent Flight Modes
With Draw, simply draw a route on screen and the Phantom 4 RTK will move in that direction while keeping its altitude locked. This allows the pilot to focus on camera control and enables more complex shots. There are two Draw modes that can be used in different scenarios:
Standard: The aircraft follows the route at a constant speed with the camera facing in the direction of flight.
Free: The aircraft only moves along the route when instructed. In this mode, the camera can face in any direction during a flight.
Following fast-moving objects can be very challenging, but advanced image-recognition algorithms used by the Phantom 4 RTK allow it to recognize and track an object while keeping it in frame. This algorithm also recognizes a range of subjects, from people to vehicles to animals, and will adjust its flight dynamics to match, ensuring smoother shots. Pilots can now choose between:
Trace: Follow behind or in front of a subject, avoiding obstacles automatically.
Profile: Fly alongside a subject at a variety of angles to get profile shots of the subject.
Spotlight: Keep the camera trained on a subject while the aircraft flies almost anywhere.
Fly in any direction visible on-screen with a simple tap. Tap anywhere on-screen to smoothly adjust the direction of flight while automatically avoiding obstacles and tap the screen again or use control sticks to change direction. An AR route function shows the aircraft’s real-time flight direction for reference as its route is adjusted. As it can be difficult to control altitude, course, speed, and camera pitch simultaneously using joysticks, TapFly Free allows a pilot to set the direction of flight, allowing them to turn the Phantom 4 RTK or tilt the gimbal as required without changing the direction of flight. In total, there are now three TapFly modes:
TapFly Forward: Tap to fly in the selected direction.
TapFly Backward: Tap to fly in the opposite direction of the tap, e.g. tap in the bottom right corner of the screen to fly backward towards the top left.
TapFly Free: Lock the forward direction of the Phantom without locking the camera direction allowing it to turn as it flies.
Note: Obstacle Avoidance is not available with TapFly Free.
Return to Home
In its Return to Home mode, the Phantom 4 RTK can automatically choose the best route to return home depending on environmental conditions. It records its route as it flies, allowing it to return along the same route and avoid obstacles if the control signal is disconnected.
Based on its altitude at the time of disconnection, the Phantom 4 RTK is also able to adjust its flight path to avoid obstacles it has seen during its flight. At takeoff, the Phantom 4 RTK will record the scene below and compare its recording with what it sees as it returns, for a more precise landing. It can also detect the ground to see whether there is a suitable spot for landing. If any obstacles are found, or if there is water on the ground, it will alert the pilot and hover at an appropriate height, helping the aircraft to land more safely.
Flight Control System
Intelligent Battery System
DJI D-RTK 2 GNSS Mobile Station for Phantom 4 RTK Drones
Accuracy is key when drone mapping in industries such as construction, surveying, inspection, and real estate. The D-RTK 2 GNSS Mobile Station for Phantom 4 RTK Drones from DJI is designed to allow Phantom 4 RTK or MG-1P RTK drones the ability to access GNSS signals for centimeter-level mapping accuracy. The mobile station’s high-gain antenna is capable of accessing all four of the major GNSS satellite constellations: GPS, GLONASS, Beidou, and GALILEO.
Flight Control System
Connect up to 5 controllers for multi-drone operations
Supports Phantom 4 RTK and MG-1P controllers
Carbon fiber body and IP67-level weather protection
Built-in IMUs monitor movement and alerts operators of abnormalities
Can also be used as a CORS (Continuously Operating Reference Station)
DJI D-RTK 2 Mobile Station Tripod
The D-RTK 2 Mobile Station Tripod from DJI works in conjunction with the DJI D-RTK 2 Mobile Station to help provide a stable platform for obtaining a GNSS connection. It’s an essential accessory for the D-RTK 2 when attempting to achieve centimeter-level accuracy for drone-based surveying and mapping projects. The tripod is designed to affix securely to the ground utilizing spikes on the ends of each of the three legs. The 3.3′ height and up to 23.6″ leg extension help to achieve a solid GNSS connection for the D-RTK 2.
DJI Enterprise Shield Basic Protection Plan for Phantom 4 RTK
Enjoy peace of mind with the Enterprise Shield Basic Protection Plan for Phantom 4 RTK from DJI. The Phantom 4 RTK is not only a considerable investment, but it is likely an integral tool for your business or occupation that you can’t be without for extended periods of time. This protection plan from DJI is designed to replace your Phantom 4 RTK in case of accidental damage. DJI charges a fee per replacement and you get up to two replacements per year. The first replacement is $299, and $399 for the second. Each replacement is shipped free via local freight, and below are the types of damage that are covered by this plan. Please note that this covers everything except the Zenmuse X4S, X5S, or Z30 gimbal. A separate plan must be purchased to cover that.
Flight Control System
Types of Damage Covered
With Enterprise Shield Basic, DJI will replace your Phantom 4 RTK due to any one of the following causes:
DJI Terra Pro Mapping Software (1-Year License, 3 Devices)
With DJI Terra Pro Mapping Software and a compatible Phantom 4 drone, you can fly detailed aerial missions over specific areas, creating digital representations of what you see in 2D and 3D models. You can then process those images to help you in a variety of industrial and professional applications such as construction, infrastructure, or agriculture.
With Terra’s analysis capabilities, you can acquire essential data on the structures and areas you’ve captured. Measure dimensions, distance, and more. You can even create annotation labels on your images to better communicate data with multiple teams or track them over time.
Flight Control System
Phantom 4 Compatibility
DJI Terra software works with the following DJI Phantom 4 drones:
- Phantom 4
- Phantom 4 Advanced
- Phantom 4 Pro
- Phantom 4 Pro v2.0
- Phantom 4 Pro+ v2.0
- Phantom 4 RTK
Industrial and Professional Uses
- Public safety: Rapidly gather critical on-site information.
- Construction: Collect, measure, and analyze data with accuracy across projects.
- Infrastructure: Perform easier inspections on complex structures.
- Agriculture: Get in-depth coverage of your crops to help improve yields.
- Filming: Previsualize your shots and locations to improve team workflow.
- Waypoints: Create specific flight paths using adjustable parameters such as altitude, speed, gimbal pitch angle, heading, and more; use 3D visualization on existing 3D models for plotting more complex paths.
- Area: Tap the screen to highlight a target area and let Terra automate the flight path over it.
- Oblique: Similar to Area, but lets you adjust the angle of the camera for capturing 3D model data of the targeted area
- Real-time mapping: Quickly generate a 2D orthomosaic of your selected area in real time.
- 2D reconstruction: Create a high-resolution orthomosaic to enable more detailed and accurate measurements.
- 3D reconstruction: Create more realistic representations of areas and structures with 3D models
- 2D and 3D measurements: Tap your 2D and 3D images to record coordinates and measure distance, area, or volume.
- Annotation: Edit measurement labels directly on model images for reporting and project communication.
- Photo inspection: Closely inspect captured images in Terra to spot issues that need addressing in the real world.